Mechanical Engineering

Bachelor's Degree by Sandip Foundation's Institute of Engineering & Management Nashik View Contact

Request Info

The Department of Mechanical Engineering has started in 2010 which offers undergraduate course admitting 60 students.We have well-equipped laboratories which adequately fulfill the requirements of undergraduate course. The department also has workshops for training in smithy, carpentry, welding and machine tools.The department has a team of highly qualified & well experienced, dedicated faculty members, who strive to give their 100 percent.

The department is committed to adopt positive approach and provide flexible and innovative learning opportunities to students and enabling them to build great careers confidently. We are committed to provide students with a high quality education which will enable them to successfully compete within all dimensions, that encourage life long learning, foster teamwork and leadership.With a clear vision to be a premier value-based department committed to excellence in preparing students for success in the engineering and technology professions through research, experienced- based instruction under the direction of a highly qualified and customer-oriented faculty and staff.

Structure: First Year Engineering (FE 2012 course)

Semester – I

Semester II

Revision Structure of SE (Mechanical)

First Term

Second Term

T.E. (Mechanical) Structure (2008 Course)

Semester - I

Semester - II

BE (Mechanical) Structure - (2008 Course)

SemesterI

Semester - I

**Theory paper of 4 hours duration

*** The term work marks shall be based on assignments / seminar as prescribed by subject syllabus.

*** 402050D Open Elective – BoS Mechanical will declare the list of subjects which can be taken under open electives or any other Electives that are being taught in the current semester as Elective – IV under engineering faculty or individual college and Industry can define new elective with proper syllabus using defined framework of Elective IV and Get It Approved From Board Of Studies And Other Necessary Statutory Systems In The University Of Pune Before 30th December.

Elective- I

402044 A Energy Audit and Management

402044 B Product Design and Development

402044 C Design of Pumps, Blowers and Compressors

402044 D Tribolgy

Elective- II

402045 A Automobile Engineering

402045 B Machine Tool Design

402045 C Quantitative and decision making Techniques

Elective- III

402049 A Computational Fluid Dynamics

402049 B Finite Element Method

402049 C Robotics

402049 D Advanced Air Conditioning and Refrigeration

Elective- IV

402050 A Industrial Heat Transfer Equipments

402050 B Management Information System

402050 C Reliability Engineering

402050 D Open Elective

Lab Facility

The mechanical engg department has full fledged 08 laboratories with state of art equipments & they are armed with the recent software highly demanded by the Employers.

1. Basic mechanical engineering: This lab has the demonstration models of I.C engines,boiler,refrigerators,air conditioner, couplings, gears, bearings, keys, shafts, clutches which help the students to understand the working of basic equipments of mechanical engineering.

2. Workshop : The mechanical engineering department has workshops for training in smithy, carpentry, welding and machine tools.

3. Applied thermodynamics : The specialty of this lab is, it has the equipments like Bomb calorimeter,Gas analyzer, multi stage reciprocating air compressor , Flash & fire point apparatus ,cloud & pour point apparatus which helps the students to take the practical readings of the above equipments etc.

4. Metallurgy : Metallurgy Lab is concerned with the analysis and testing on various materials which include chemical, mechanical, micro/macro, destructive and non-destructive testing for a wide range of metal materials or products. The metallurgical and analytic laboratories are used in in failure analysis of fracture, creep, fatigue, wear, deformation, corrosion control, materials evaluation & development, and more. Metallurgical laboratory applications are related to general manufacturing, consumer products, energy, transportation and marine and many other industries.Various Equipments available in the Metallurgy Lab are listed below:

Rockwell Hardness Tester, Poldi Hardness Tester,Vickers Cum Brinell Hardness Tester, Magnetic Particle Crack Detector, Fluorescent Dye Penetrant, Red Penetrant, Jominy End Quench Hardness Test Apparatus, Binoculur Metallurgical Microscope, Trinocular Metallurgical Microscope with CCTV Attachment & USB Camera,Standard Metallurgical Micro structural Set, Double Disc Polishing Machine, Abrasive Belt Grinder, Impact Testing Machine to conduct the various test on the given samples.

5. Fluid Mechanics & Fluid Machinery : This lab deals with the basic laws & principles of hydraulics with the various equipments like Redwood Viscometer, Flow Measurement By VenturiMeter and Orificemeter, Bernoulli’s Theorem Apparatus,Weir & Notch Apparatus etc.

6. Machine Drawing & Computer graphics : This lab has latest version software's like AUTO-CAD 2011,PRO-E, CATIA.

7. Theory of Machines-I : This lab cover the wide area of Design Engineering & vibration & quipped with various test rigs of Clutch & Brake test rig, Universal Governor, Gyroscope, Balancing machine, gear train apparatus, frequency measurement, critical speed of shaft apparatus etc. 

8. IC Engines : The IC engines lab has the advanced machineries like computerized petrol engines test rig, diesel engine test rig, flue gas analyzer,variable compression ratio engine etc.

Eligibility

Sandip Institute of Engineering and Management, affiliated to the University of Pune runs BE courses on campus. Details of admission for these courses are provided by the Directorate of Technical Education/State government as per their circulars on the issue.

The College is a linguistic Hindi minority college, administered under the Provisions of the Indian Constitution, to promote the welfare of the Minority community and to extend its services to all other communities in India, so as to contribute to the harmony and integration of Indian society. 51% of seats are reserved for Hindu Minority students. 21% seats are filled at the Institute level under the Management quota. As per the directives of the Government of Maharashtra, there is also a reservation for Special category students and for Backward Class students. The rest of the seats are for students from the General Category.

The specific criterion is as follows:

First Year of Engineering

• Candidates should be Indian Nationals

• Should have passed HSC(Std.XII) examination of Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent examination securing minimum 45% marks in English, Physics, Chemistry & Mathematics

• Should have 135 marks out of 300 marks (120 marks in case of candidates belonging to Backward class categories from the State of Maharashtra) in Physics, Chemistry & Mathematics added together.

• Should have obtained a non zero score in Physics, Chemistry & Mathematics added together at MHT-CET.

• Diploma holders who have completed their courses in Engineering / Technology with minimum of 45% marks and medium of instruction as English from institutions affiliated to MSBTE or AICTE approved in Maharashtra (for Maharashtra States Candidates) or such institutes situated inside/outside the state of Maharashtra (for outside Maharashtra state candidates).

• Direct Admission to Second Year of Engineering:

• Candidates must have passed three year Diploma course (Post - SSC or Post HSC) in Engineering from MSBTE, Mumbai or its equivalent with minimum 50% marks.

• Candidates belonging to backward class categories must fill in the Form which will be available in the information brochure to be attested by competent authority.

• Candidates hailing from Jammu & Kashmir and the North Eastern states of Assam, Meghalaya, Manipur, Tripura, Sikkim, Nagaland, Mizoram and Arunachal Pradesh should fill in CERTIFICATE TO PROVE NATIVITY Performa which will be available in the information brochure and has to be attested by competent authority.

First Year of Engineering Degree Course:

Government seats:

Admission process for Government quota seats will be carried out as per the schedule declared by the Directorate of Technical Education, Mumbai (Maharashtra State) from time to time. Students are also advised to check the website of Directorate of Technical Education.

Institute Level/Minority (Hindi Linguistic) Seats:

The details of the admission process, for the Institute level / Minority seats will be notified from the Director of Technical Education, Maharashtra State. All the necessary details related to admission will be displayed on college notice board and on the college website.

The principal of the institute will invite applications for Institute Level/Minority through advertisements in leading newspapers.

• Aspiring candidates fulfilling the eligibility criteria given below and wish to take admission should apply directly to the Principal or alternatively individuals can visit the campus.

• Such seats will be filled by the Institute strictly on the basis of merit.

Schedule to fill up Seats remaining vacant after CAP(Common Admission Procedure) round and Institute Level/ Minority quota round will be displayed on the college Notice board as well on the web site of the institute.

Admission Procedure:-

First Year Engineering Degree Course

The following Admission Procedure should be followed by all candidates who have been allotted seats by the Director of Technical Education, Maharashtra State, Mumbai for admission to the First Year (F.E.) of Engineering Degree Course at "Sandip Institute of Engineering & Management", Mahiravani, Nashik:

Step 1: Report the Admission Cell to know about how to fill the admission, submission of undertaking, certificates, fees by DD, etc.

Step 2: Purchase the Admission Form.

Step 3: Fill the Admission Form neatly & completely.

Step 4: Get the duly filled Admission form verified from the designated Competent Authority / Admission Cell at the College office.

Step 5:Collect the "Acknowledgment Letter" of submission of the original Documents from the Student Section.

Step 6:Pay the Adhoc/Interim Fees as stipulated by the Shikshan Shilka Samiti by demand draft drawn in favour of "Sandip Institute of Engineering & Management" payable at Nashik.

Step 7:Collect the Fee Payment Receipt from the Accounts Section.

Step 8:Report at the concerned counter to generate the Provisional Admission Receipt from D.T.E. Mumbai.

Submission of Original Documents along with two attested photocopies of the followings documents:

 Note: Candidate should keep duly attested three sets of photo copies of the Documents.

Faculty Information

Non-Teaching Faculties

Sandip Foundation's Institute of Engineering & Management